How do I reset my RC 73 DirecTV remote?
-Press and hold mute and select until the light blinks. -After releasing mute and select, type the numbers “9, 8, 1” in that order. -You should see the light blink again on the remote after typing the above 3 numbers. -Your remote should now be factory reset.
How do I reprogram my DirecTV Remote Control?
Program remote for an HD DVR or HD receiver
- Press MENU on your remote.
- Select Settings > Remote Control > Program Remote.
- Choose the device (TV, audio, DVD) you wish to program.
- Follow the on-screen prompts to complete programming.
How do you program a RC 71 remote?
Here’s how to follow the steps you’ll need!
- Start by pressing the {MENU} button on your remote, then arrow down to “Settings” and press {SELECT}.
- Arrow down to “Remote Control” and press {SELECT}.
- Arrow down to “Program TV” and press {SELECT}.
- Now here, find the model of your TV, highlight it and press {SELECT}.
Where is the mode switch on my DirecTV remote?
Find the MODE switch at the top of the remote, and slide it over to TV. Press and hold the MUTE and SELECT buttons at the same time until a green light flashes twice from the top of your remote. Punch in the numbers 960, which should prompt the green light to flash twice again. Switch the MODE to the DIRECTV logo.
Why does my DIRECTV remote not change channels?
If your remote is not responding, changing channels or adjusting the volume, make sure you have direct line of sight to the receiver.. Next, make sure your remote is set to control your DIRECTV receiver: At the top of the remote, slide the mode switch all the way to the left to the DIRECTV symbol.
Why is my DirecTV remote not programming?
If the DirecTV remote isn’t working, first try removing any objects that might be blocking the signal from the remote, second by replacing the batteries, and finally resetting the remote and the receiver. If none of these fixes do the job, it is time to get a new DirecTV remote.
How do I program my DirecTV remote RC71H to my LG TV?
**Note: In order to program the RC71H remote control; Press and hold “Select” & “Mute” keys for 3 seconds (until the visible green LED blinks twice) → Press the first digit of the code→ Wait for 2 green LED blinks → Press the rest of the code. If a valid code has been entered, the green LED will blink twice.
https://www.youtube.com/watch?v=wrk7vUBCyPo