Trending

What is a good overall latency?

What is a good overall latency?

Yes, somewhere between 10 and 20ms latency seems to be where most people start to find problems.

How much latency is audible?

Live performance audio. Latency in live performance occurs naturally from the speed of sound. It takes sound about 3 milliseconds to travel 1 meter. Small amounts of latency occur between performers depending on how they are spaced from each other and from stage monitors if these are used.

What is a good latency for audio?

While some keyboardists claim to hear a 5ms discrepancy in their performances, the vast majority of musicians are unlikely to worry about 10ms, and many should find a latency of 23ms or more perfectly acceptable with most sounds, especially pads with longer attacks.

Does latency matter for mixing?

Does computer latency matter? Not when you’re mixing, but it does when you’re recording (but you can bypass the computer when recording – please see “direct monitoring” below). And when you’re playing virtual instruments running on the computer, you want them to be as responsive to your playing as possible.

Is a 12 ms latency good?

Latency is measured in milliseconds, and indicates the quality of your connection within your network. Anything at 100ms or less is considered acceptable for gaming. However, 20-40ms is optimal.

Is 40 ms latency good?

The difference between high and low latency Low latency is ideal as this means you are experiencing smoother gameplay. Generally, an acceptable latency (or ping) is anywhere around 40 – 60 milliseconds (ms) or lower, while a speed of over 100ms will usually mean a noticeable lag in gaming.

How do I lower audio latency?

How to reduce audio interface latency

  1. Reduce the buffer size. The smaller the buffer size, the lower the latency.
  2. Raise the sample rate.
  3. Disable the Audio Input Device.
  4. Use ASIO audio drivers on Windows.
  5. Use a dedicated audio interface running native drivers.
  6. Don’t use Bluetooth devices or cast audio.

Is 2ms latency good?

Ping is measured in milliseconds (ms). Anything under 20ms is generally considered to be very good. 2ms is about as low as you’re going to get.

What is acceptable latency for DAW?

But in most situations, moderate amounts of latency will be just fine: typically around 8-12 ms may work for most situations, and this won’t require the absolute lowest buffer sizes offered, maintaining a good compromise with the average DAW computer between low latency and reliable recording and playback.

Is direct monitoring zero latency?

Direct monitoring allows you to listen to the input signal of the interface with near-zero latency. It takes the input signal on the interface and sends it straight to the headphone and line outputs on the device. The signal is still sent to your DAW software allowing the input to be recorded at the same time.

How do I lower my latency?

How to Reduce Lag and Increase Internet Speed for Gaming

  1. Check Your Internet Speed and Bandwidth.
  2. Aim for Low Latency.
  3. Move Closer to Your Router.
  4. Close Any Background Websites and Programs.
  5. Connect Your Device to Your Router via an Ethernet Cable.
  6. Play on a Local Server.
  7. Restart Your Router.
  8. Replace Your Router.

Is 92 ms latency good?

Low latency is not the same as low speed. Latency is measured in milliseconds, and indicates the quality of your connection within your network. Anything at 100ms or less is considered acceptable for gaming. However, 20-40ms is optimal.