How do you hide threads in Solidworks?

How do you hide threads in Solidworks?

If your settings are all good to go and you still aren’t seeing your cosmetic threads, the annotations may be set to hidden. To check that, go to View > Hide/Show . Make sure that the ‘All Annotations’ icon is selected (depressed), and ‘Hide All Types’ is not.

How do you show threads in tapped hole solidworks?

For tapped holes without cosmetic threads, the hole diameter is the outer diameter of the thread. . On the Document Properties tab, select Detailing. Under Display filter, select Shaded cosmetic threads.

What is a hole tap?

Tapping a hole is the process of creating threads on the sides of a drilled hole to enable screwing in a bolt or machine screw. This instructable will focus on primarily the use of taper taps, although there will be some mentioning of bottoming taps.

What is a cosmetic thread in Solidworks?

Cosmetic threads describe the attributes of a specific hole so you need not add real threads to the model. A cosmetic thread represents the minor (inner) diameter of a thread on a boss or the major (outer) diameter of a thread on a hole and can include a hole callout in drawings.

How do you show thread in engineering drawing?

Use slanting lines to represent crest and root. Roots and crest are drawn in sharp Vs. Use alternate long and short lines for representing crests and roots of the thread, respectively. Use thick continuous lines for representing crest and thin continuous lines for representing root of the thread, respectively.

Where is extrude thread on Solidworks?

Using the Thread Tool The Thread Tool can then be found underneath the Hole Wizard Tool on the Features tab of the Command Manager, or in Insert>Features>Thread.

What is a cosmetic thread in SolidWorks?

How is a threaded hole defined?

A tapped hole is a hole drilled prior to a machine screw being inserted. A tapped hole is similar to a pilot hole, except that it is usually larger, and has threads cut into the inside surface of the hole. Tapped holes are used in metals where a nut and bolt cannot be used.

What is a threaded hole called?

That is simply called a threaded insert.

How do I edit cosmetic threads in SOLIDWORKS?

Editing Cosmetic Threads

  1. In a part or assembly document, right-click the Cosmetic Thread feature and click Edit Feature .
  2. Make the necessary changes in the Cosmetic Thread PropertyManager, and click .