What is the proper way to store fire hose?
Fire hose should be stored in cool, dry and well ventilated conditions. When loaded on a fire appliance or vehicle it should be stowed in such a way that air circulation can take place and that excessive chaffing against the sides of vehicle lockers due to vibration is minimised.
What is a split hose bed?
Split hose bed: A hose bed arranged to enable the engine to lay out either a single supply line or two supply lines. simultaneously. (
How much hose is required on a fire truck?
NFPA 1901: Standard for Automotive Fire Apparatus (2016 edition) specifies the following hose and nozzles for pumper fire apparatus in Chapter 5. 800 feet of 2½-inch or larger hose. 400 feet of 1½-inch, 1¾-inch or 2-inch hose. One handline nozzle, 200 gpm minimum.
What is a Dutchman fold?
DUTCHMAN- A. short fold or reverse bend used to allow couplings to pay out without them turning over.
Should fire hose be packed tightly?
When stored, allow plenty of room for the fire hose to breathe. Refrain from storing the fire hose in containers that create an air-tight storage environment such as plastic bags or shrink wrap. Doing so traps moisture inside the hose, which may facilitate mold or mildew growth.
Which is a feature of transverse bed?
Hose bed that lies acrosse the pumper body at a right angle to the main hose bed; designed to deploy preconnected attack hose to the sides of the pumper.
What is the minimum size hose line for a vehicle fire?
If you have a discharge on your apparatus that’s commonly used for vehicle fires, it should have at least 100—150 feet of 1 ½” or larger hose. Most departments’ weapon of choice is the 1 ½” or 1 ¾” hose matched with a nozzle that will flow a minimum of 100 gpm.
What size hose do firefighters use?
There are three standard-sized hoselines that the fire service uses as a front line attack line: 1½, 1¾ and 2½ inch. The remaining situations might involve large master streams or deck guns. The key with selecting the correct size line is quite simply getting the right amount of water on the fire.
What is the standard size of fire hose?
The standard three sizes of hose lines are 1½, 1¾ and 2½ inch. Depending on the size and severity of the fire, hose line requirements vary to get the job done efficiently.
Which is an advantage of a forward lay?
Using the forward-lay method provides the engine company officer with a few seconds to size up the structure while the firefighter is wrapping the hydrant, and it also affords the officer a three-sided view of the structure when the operator pulls past the fire building.
What hose load does FDNY use?
134-inch hose
Response: FDNY uses 134-inch hose as its primary attack line in most situations.