Helpful tips

How do I reset my Ingenico PIN pad?

How do I reset my Ingenico PIN pad?

To reset your Ingenico ISC 250 touch or ISC 350 terminals, hold down the minus and yellow clear button at the same time. Unplugging the terminal and replugging while connected to a power source is not recommended and doing so may corrupt the pin debit key, requiring a new key encryption injection.

How do I connect Ingenico to my computer?

Connect hardware

  1. Plug the connection cable’s flat end into the payment terminal and secure it with the included screws.
  2. Plug the power supply into the connection cable’s round end.
  3. Plug the connection cable’s USB end into the back of the computer.
  4. Plug the power supply into an electrical outlet.

How do I reset my Ingenico iPP350 PIN pad?

Resetting the iPP350/320 card reader To reboot your iPP model POS card reader simply hold down the YELLOW and “#” keys at the same time. Bootup takes approximately 60 seconds and will force the card reader to reconnect to your network router and POS app.

How do I install a PIN pad?

How to Install an EMV Enabled IPP350 Pin Pad

  1. Step 1: Connect your new PIN Pad. Plug the USB cable of the pin pad to the computer.
  2. Step 2: Install the device Drivers. The newly connected device should be recognized by Windows and should install the required software drivers automatically.
  3. Step 3: Test Pin Pad.

How do I turn my PIN pad on?

Plug the USB charging cable into the micro-USB port on the PAYD PIN Pad. 2. Plug the other end of the cable into a powered USB port. (The PAYD PIN Pad beeps and then powers on.)

How do I initialize PIN pad?

Power cycle the iPP320 PIN Pad. On the PIN Pad, hold down the yellow key and press the punctuation key at the same time. The iPP320 PIN Pad will beep and restart. 2.

How do I reset my PIN pad?

On the PIN Pad, hold down the yellow key and press the punctuation key at the same time. The iPP320 PIN Pad will beep and restart. 2. When you see the version information screen, you have 10 seconds to press the red key, and then press the green key.